How Much Does It Cost To Dig Up A Concrete Driveway?

How much does it cost to replace a concrete driveway?

The national range for tearing and replacing a driveway is between $6,275 to $8,500.

The average is $7,394 for a poured concrete driveway as per Angie’s list members.

The average cost is $3,500 to $7,000 which $3 to $10 per hour, roughly..

Can you pour concrete over existing driveway?

In most cases, the answer is YES! You can do that, but the existing slab must fulfill certain conditions to support a new concrete layer. Talking of concrete, who wouldn’t love to see a squeaky clean patio or driveway every day? … So, you may ask if pouring new concrete over the old one is a better option.

Can you pour new concrete over old cracked concrete?

However, if your concrete is relatively sound and raising its elevation a few inches would not create problems, then you can pour new concrete directly over the old. … If you bond new concrete to old, any cracks in the existing slab will transfer up into the new slab, and usually within a day or two.

How hard is it to dig up concrete?

Breaking concrete is never an easy project. … With small slabs of concrete, such as patio squares or air conditioner pads, you can also have one person pry up the slab a few inches, using a demolition bar, while another person strikes the slab with the hammer.

Will a pickaxe break concrete?

Yes, but it’s a lot of work. Use the pick end a strike near the same spot repeatedly. … Try lifting it, using the pickaxe as a lever, put a rock under it, etc. Once the concrete is elevated, hit it in the middle, it should break into pieces.

How much does it cost to have your driveway redone?

Expect to pay about $2.25 per square foot for basic driveway resurfacing. So a typical residential driveway of 750 square feet would cost about $1,687. If you want patterns or colors, you need to pay more, around $4 to $8 per square foot, or $3,000 to $6,000 for a 750-square-foot driveway.

Can I Concrete my own driveway?

It is possible to build an attractive concrete driveway yourself, but careful planning and preparation is necessary. Be sure to place all the concrete at once; a big driveway can be broken down into smaller manageable sections using 2×4’s.

How can I widen my driveway cheaply?

Installing stabilized gravel with permeable pavers, however, is the single cheapest and most effective solution to extending a driveway while providing long-term durability and functionality. TRUEGRID offers every type of paver you need to match your driveway situation.

Does a new driveway add value to a house?

You can definitely get a great return on your investment. At the very least your property value increase will cover the cost of the driveway. The amount of added value can fluctuate. Depending on the home, a new driveway can add around $5,000 to $7,000 in value.

Will fresh concrete stick to old concrete?

The cement within a concrete mix doesn’t contain any natural bonding agents – so when fresh concrete is added on top of an existing layer of concrete, the two won’t join together. Once cured, the new concrete will simply sit on top as a separate layer. This will not produce a strong, serviceable floor.

How deep do I need to dig for a concrete driveway?

As for thickness, non-reinforced pavement four inches thick is standard for passenger car driveways. For heavier vehicles, a thickness of five inches is recommended. To eliminate standing water, the driveway should be sloped towards the street a minimum of one percent, or 1/8 inch per foot, for proper drainage.

Does a concrete driveway increase property value?

The Value of Your House. Associated with curb appeal, but closer to your bottom line is your home’s value. Of course there are many factors here, but a house with a decorative concrete driveway can be worth as much as 10% more on the open market.

Is wire mesh necessary in concrete driveway?

When it comes to concrete, you can’t avoid cracks entirely, but wire mesh reinforcement will help hold the material together when they do occur. Also, it will help evenly distribute the weight of cars on your driveway. The added strength of steel is especially crucial if your subgrade isn’t up to par.

How do you dig up a concrete driveway?

Starting at a corner, break up a small section of the driveway using your jackhammer. If necessary, use a sledgehammer to break any large chunks of concrete into smaller pieces. Use a shovel and wheelbarrow to move the debris into your concrete dumpster or pickup truck.

How much does it cost to pave a 2000 sq ft driveway?

Paving an asphalt driveway costs $4,719 on average, with a typical range between $2,930 and $6,558. This project runs $7 to $13 per square foot, including $2 to $6 per square foot for materials and $5 to $7 per square foot for labor. If you need replacement, you’ll pay $8 to $15 per square foot.

What is the cheapest type of driveway?

Gravel2. Gravel. This is one of the cheapest alternatives to asphalt driveways by far, costing very little to have installed. The average gravel driveway consists of hard, angular gravel laid throughout the driveway.

Can you concrete over existing concrete?

Yes, you may pour a concrete pad overlay over an existing slab. … You need to consider the added height and weight of the overlay on the existing structure. Overlays may include polymers, portland cement concrete, or epoxies.

What is the best tool for breaking up concrete?

metal sledgehammerWhen thinking about breaking up concrete, most of our minds jump straight to jackhammer. But you can probably do the work with a metal sledgehammer and a little elbow grease. Sledgehammer is the best tool to use if the slab of concrete is three inches thick or less.